Products - The next generation of chemical-free protection

The next generation of chemical-free corrosion protection for closed loop heating and cooling systems

Our galvanic system utilises principles proven over 50 years to deliver water treatment methods that focus on prevention rather than cure. Our sacrificial magnesium anodes strictly control the causal elements of corrosion to stringent levels.

Our solution goes on to maintain and protect your closed loop networks and engineers an environment which is hostile to both corrosion and bacteria. 

IWTM Protector™

Our Protector series is the next generation of chemical free water treatment sized for system volumes over 5,000 litres. These hybrid units have a 40-micron basket which filters the system whilst allowing for the anodes to be unsheathed. This allows the anodes and magnets, which now run the length of the internal vessel, greater contact with the surface area of the water.

This makes the Protector series the most efficient chemical free solution on the market offering faster clean-up of existing systems and enhanced protection for new.

Brochure

Manual

Protector Digital

All-in-one Filtration and Water Treatment unit with real time monitoring. IWTM Protector™ Digital uses the same technology as our analogue range, but as well as protecting your water system, Protector Digital also constantly collects live data, which can be used to analyse what is happening in the system and provide advanced warning of the need to perform preventive maintenance, thus saving you time and money.

Sizing: For P25, P40 & P70

Protector Digital measures and monitors three key requirements of VDI 2035 to

pH
Conductivity
Dissolved Oxygen

as well as anode output, flow, temperature, pressure and pressure differential over the filter.

Brochure

IWTM Protector™ P120 - P1500

The IWTM Protector™ P120 - P1500 saves space and costs on large scale heating or cooling networks that require operation to the VDI 2035 standard, by using one reaction tank to cover from 120m³ to 1500m³, within the range of 7 different sized models.

We have developed the P120-P1500 to complement our high temperature/high pressure industrial range that we have historically used for large scale district heat networks. The P120 to P1500 standard design is to work on the lower operating temperatures and pressures that many

modern heat networks require.

As standard the units are designed to operate at 10 bar and a maximum 90⁰C, with BMS connections available for the anode output, we also have options for the range as below:

-110⁰C model

-16bar

-Left or right-handed inlet/outlet connections

-Electronic pressure sensors on the anode filter.

Manual