IWTM Protector™ Prime filling and rinsing device when used with our Prime pH resin makes sure your heating or cooling system is initially filled and prepared for use, to be compliant with IWTM and VDI 2035 guidelines.
Fill water can contain aggressive salts and minerals which in turn can cause uncontrolled pH and a high electrical conductivity both of which are major causes of corrosion. Our Prime range is used for filling and rinsing systems to control these elements to clean, maintain and protect systems against corrosion and bacteria.
The Prime is a robust mobile filling and rinsing device, which prepares the system for ideal water quality levels.
2 sizes available. Based on either our 12.5 or 25 Litre Protector ProFill, the Prime sits in line with our policy of moving away from single use plastic that is used in many resin cartridge devices. As well as looking after the environment it also reduces the demineralised filling cost per litre.
The inlet and outlet conductivity meter can be read in uS/cm or TDS and the flow meter provides the flow rate and volumetric counter, with our eyebolt lid making the resin change quick and easy.
Our ProFill mobile is used for demineralised filling of heating and cooling systems and for resin rinsing when remedial cleaning of systems previously treated with chemicals is required. When used with our controlled pH resin the fill water achieves VDI2035 water quality standards.
It is based on the same technology as our ProFill 50 and offers simple monitoring with a flow rate of 25l/m.
The IWTM Protector™ mobile is a high flow rinsing rig used for pre commissioning cleaning and fast remedial cleaning, when needing to strip away the system debris and existing chemicals from closed heating or cooling systems. The Protector Mobiles have pumps, stainless steel micron filters, high power magnets, pressure gauges, optional bag filters down to 1 micron and are fitted with magnesium anode technology resulting in cleaning and engineering the water simultaneously.
Once the system is cleaned, the Mobile is removed and our Protector units stay in place and engineer the water for life.
The Protector Mobile comes as three sizes. P10 Mobile, P40 Mobile Size 1 and P40 Mobile Size 2.
P10 Mobile has a smaller area for collecting debris. P40 Size 1 has a smaller size pump than Mobile 2, which has a larger pump and the ability to be connected to create a multi-unit for systems with larger capacity.
Contact us to discuss how our chemical-free water treatment solutions can deliver instant ROI